Quick little jam with a bass riff from the Arturia Microbrute and playing around with the Manhattan Analog MA35. Full patch notes below.

PATCH NOTES

Sequence from Arturia Microbrute. Gate output into Circuit Abbey Gozinta for boosting the level and pitch into Intellijel Dixie Controller.

Main oscillator and only audio oscillator is an Intellijel Dixie taking the pitch from the Dixie Controller. The triangle output is used and taken into the Bubblesound cvWS with the triangle shaped into a sine with the Bubblesound shaped sound output into the cvWS CV in. The cvWS output goes into the Abstract Data ADE-10 Reactive Shaper taking advantage of the folding/feedback/clipping available. Another Dixie in LFO (with the rate affected by the 1v/oct input on the Dixie Controller) modulates the feedback circuit in the ADE-10. That then goes into a Barton Waveform Animator. The output of the Animator is split into a Manhattan Analog CP3 mixer and the second into a Livewire Frequensteiner in band pass mode with high resonance and CV modulation a third Dixie in LFO mode (again affected by the sequence in the Dixie Controller). The Frequensteiner’s output then goes into the next channel on the CP3 mixer. The third channel on the mixer is taken by the first Dixie’s (only audio oscillator) ZigZag waveform (saw/square mix). The mixer output then goes into the Manhattan Analog MA35’s first input and the filter modulated by the WMD Multi-mode envelope which is gated from the Microbrute. The MA35 output goes into a Doepfer A-199 with a 19″ spring reverb tank before going to my output.

Simple patch playing around with the analogue elements in my case trying to make one oscillator big fat, rich and over the top!